China En14399-4 Manufacturer, Supplier, Factory

ANSI A490 Balck Heavy Hex Bolts are specifically designed for use with heavy hex nuts in the connection of structural members (as opposed to tapped holes). ANSI A490 Balck Heavy Hex Bolts are strong heavy-duty bolts that are typically used for creating structures through steel to steel structural connections such as buildings and bridges. A grade 8 bolt would be one that meets ASTM A490 standards. The high quality steel used to create ANSI A490 Balck Heavy Hex Bolts are designed for strength and durability, allowing ANSI A490 Balck Heavy Hex Bolts to conform to ASTM A325. ANSI A490 Balck Heavy Hex Bolts are often applied alongside structural nuts and washers to metal beams and girders.

ASTM A307 Grade B Carbon Steel Threaded Rod , also known as a stud, is a relatively long rod that is threaded on both ends; A threaded rod in bar stock form is often called all-thread (ATR); other names include fully-threaded rod, redi-threaded rod, continuously-threaded rod, and TFL rod.

En14399-4 Grade10 Black Hex Nut with Hv also called structural nuts, are both thicker and wider than a standard (finished) hex nut and compatible with high strength and large diameter bolts. En14399-4 Grade10 Black Hex Nut with Hv in sizes smaller than 7/16" are double chamfered. En14399-4 Grade10 Black Hex Nut with Hv larger than 7/16" are either double chamfered or chamfered on top with a washer faced bearing surface.

DIN6923 Hex Flange Nuts provide a secure and tight fit, while also preventing the nut from loosening due to vibration. This is especially important in industries where machinery and other heavy equipment are used, as any loosening of fittings can cause dangerous and costly consequences. The flange of DIN6923 Hex Flange Nuts acts as a washer, providing additional support while preventing the nut from embedding itself into the surface of the material being fastened. This greatly reduces the risk of damage to the structure, as well as providing a more aesthetically pleasing finish.

ANSI D-21 Hex Flange Nut provide a secure and tight fit, while also preventing the nut from loosening due to vibration. This is especially important in industries where machinery and other heavy equipment are used, as any loosening of fittings can cause dangerous and costly consequences. The flange of ANSI D-21 Hex Flange Nut acts as a washer, providing additional support while preventing the nut from embedding itself into the surface of the material being fastened. This greatly reduces the risk of damage to the structure, as well as providing a more aesthetically pleasing finish.

ISO13918 Welding Stud refer to the installation of steel pins or grommets, that extend out of the top flange of a steel support beam. Normally the ISO13918 Welding Stud are welded, with a spot welder, after the metal deck is installed over the supporting structural steel. The spot welder will burn through the metal deck and attach the ISO13918 Welding Stud directly to the top of the steel beam.