China Hv Manufacturer, Supplier, Factory
Our enterprise since its inception, constantly regards product good quality as organization life, constantly improve production technology, strengthen merchandise high quality and continuously strengthen enterprise total good quality administration, in strict accordance with all the national standard ISO 9001:2000 for Hv,En14399-6,Black Washer,En14399 6,Washer with Hv, "Quality first, Price lowest, Service best" is the spirit of our company. We sincerely welcome you to visit our company and negotiate mutual business!
Hv, We always insist on the management tenet of "Quality is first, Technology is basis, Honesty and Innovation".We've been able to develop new products and solutions continuously to a higher level to satisfy different needs of customers.
Related Products
Hot Products
ASME B18.21.1 Spring Washer
ASME B18.21.1 Spring Washer are widely used in load-bearing and non-load-bearing structures of general mechanical products. They are characterized by low cost and convenient installation, and are suitable for the parts with frequent assembly and disassembly. ASME B18.21.1 Spring Washer in the screw industry, often called ASME B18.21.1 Spring Washer. The benefit of spring lock washers lies in the trapezoidal shape of the washer. When compressed to loads near the proof strength of the bolt, it will twist and flatten. This reduces the spring rate of the bolted joint which allows it to maintain more force under the same vibration levels. This prevents loosening.
DIN6915 10 Hv Heavy Hex Nuts
DIN6915 10 Hv Heavy Hex Nuts also called structural nuts, are both thicker and wider than a standard (finished) hex nut and compatible with high strength and large diameter bolts. DIN6915 10 Hv Heavy Hex Nuts in sizes smaller than 7/16" are double chamfered. DIN6915 10 Hv Heavy Hex Nuts larger than 7/16" are either double chamfered or chamfered on top with a washer faced bearing surface.
GB10433 Welding Shear Stud
GB10433 Welding Shear Stud refer to the installation of steel pins or grommets, that extend out of the top flange of a steel support beam. Normally the GB10433 Welding Shear Stud are welded, with a spot welder, after the metal deck is installed over the supporting structural steel. The spot welder will burn through the metal deck and attach the GB10433 Welding Shear Stud directly to the top of the steel beam.
Heavy Hex Jam Nut
Heavy Hex Jam Nut, Use with ASTM193 hex bolt/stud bolt, QBH can provide you Heavy Hex Jam Nut with Coarse thread and fine thread, Heavy Hex Jam Nut high quality help us get more cooperation with customers abroad.
ASTM F436 Steel Structure Metal Flat Round Washer
ASTM F436 Steel Structure Metal Flat Round Washer is stamped piece from, The shape is round with a hole in the middle. ASTM F436 Steel Structure Metal Flat Round Washer have a smooth bearing surface which is used under the head of a bolt, ASTM F436 Steel Structure Metal Flat Round Washer are used to reduce friction, The force is unoform, It is not easy to slip and lock in the process of rotation, and it is anti loose design, prevent leakage, isolate, prevent loosening, or distribute pressure.
Carbon Steel Heavy Hexagonal Nut
Carbon Steel Heavy Hexagonal Nut are the most commonly used nuts in the fastener industry.Carbon Steel Heavy Hexagonal Nut are relatively strong and durable fasteners that can withstand some special industrial conditions. Carbon Steel Heavy Hexagonal Nut hardness, thickness and tensile strength enable it to withstand some extreme industrial environments.
- Related Blog
- Reviews
