China ASTM A194-4 Manufacturer, Supplier, Factory

Shear Connector Welding Screw refer to the installation of steel pins or grommets, that extend out of the top flange of a steel support beam. Normally the Shear Connector Welding Screw are welded, with a spot welder, after the metal deck is installed over the supporting structural steel. The spot welder will burn through the metal deck and attach the Shear Connector Welding Screw directly to the top of the steel beam.

As1252 Heavy hexgonal Bolt are commonly used in critical structural applications such as Bridges, buildings and other infrastructure. Ensuring their quality is critical to the safety and structural integrity of these works. The control and traceability of the A325M heavy duty hex bolt or any fastener is a key aspect of the construction and engineering industry. Safety and structural integrity are the correct applications that distinguish As1252 Heavy hexgonal Bolt. Batch control and traceability help maintain the highest safety standards. Batch control ensures that the bolts used in the project come from the same production batch. This helps maintain consistent quality and ensures that all bolts from a particular batch meet the same specifications and standards. In the rare cases where defects or problems are found in a particular batch of bolts, being able to trace back to the source of those bolts can facilitate an effective recall and replacement. This minimizes downtime and project delays.

DIN6915 10 Hv Heavy Hex Nuts also called structural nuts, are both thicker and wider than a standard (finished) hex nut and compatible with high strength and large diameter bolts. DIN6915 10 Hv Heavy Hex Nuts in sizes smaller than 7/16" are double chamfered. DIN6915 10 Hv Heavy Hex Nuts larger than 7/16" are either double chamfered or chamfered on top with a washer faced bearing surface.

ANSI A490 Balck Heavy Hex Bolts are specifically designed for use with heavy hex nuts in the connection of structural members (as opposed to tapped holes). ANSI A490 Balck Heavy Hex Bolts are strong heavy-duty bolts that are typically used for creating structures through steel to steel structural connections such as buildings and bridges. A grade 8 bolt would be one that meets ASTM A490 standards. The high quality steel used to create ANSI A490 Balck Heavy Hex Bolts are designed for strength and durability, allowing ANSI A490 Balck Heavy Hex Bolts to conform to ASTM A325. ANSI A490 Balck Heavy Hex Bolts are often applied alongside structural nuts and washers to metal beams and girders.

ASTM A563 HDG Heavy Hex Nut are the most commonly used nuts in the fastener industry.ASTM A563 HDG Heavy Hex Nut are relatively strong and durable fasteners that can withstand some special industrial conditions. ASTM A563 HDG Heavy Hex Nut hardness, thickness and tensile strength enable it to withstand some extreme industrial environments.

JIS1190 Bhex Nut with Flange provide a secure and tight fit, while also preventing the nut from loosening due to vibration. This is especially important in industries where machinery and other heavy equipment are used, as any loosening of fittings can cause dangerous and costly consequences. The flange of JIS1190 Bhex Nut with Flange acts as a washer, providing additional support while preventing the nut from embedding itself into the surface of the material being fastened. This greatly reduces the risk of damage to the structure, as well as providing a more aesthetically pleasing finish.