China SABS 1282 Manufacturer, Supplier, Factory

DIN436 Flat Washers Square Washer fit into slots and channels and have flat sides to keep them from rotating. DIN436 Flat Washers Square Washer are wider and thicker than most round washers, making them good for distributing heavy loads. Zinc-plated DIN436 Flat Washers Square Washer are corrosion resistant in wet environments.

Shear Connector Welding Screw refer to the installation of steel pins or grommets, that extend out of the top flange of a steel support beam. Normally the Shear Connector Welding Screw are welded, with a spot welder, after the metal deck is installed over the supporting structural steel. The spot welder will burn through the metal deck and attach the Shear Connector Welding Screw directly to the top of the steel beam.

DIN6923 Hex Flange Nuts provide a secure and tight fit, while also preventing the nut from loosening due to vibration. This is especially important in industries where machinery and other heavy equipment are used, as any loosening of fittings can cause dangerous and costly consequences. The flange of DIN6923 Hex Flange Nuts acts as a washer, providing additional support while preventing the nut from embedding itself into the surface of the material being fastened. This greatly reduces the risk of damage to the structure, as well as providing a more aesthetically pleasing finish.

DIN961 Hex Bolt is the most commonly used hex bolt in the metric bolt, DIN961 Hex Bolt common grades are 4.8, 6.8, 8.8, 10.9, 12.9. DIN961 Hex Bolt surface is coated with different coatings for different environments.

GB1229 Heavy Hex Nut are the most commonly used nuts in the fastener industry.GB1229 Heavy Hex Nut are relatively strong and durable fasteners that can withstand some special industrial conditions. GB1229 Heavy Hex Nut hardness, thickness and tensile strength enable it to withstand some extreme industrial environments.

ASTM A325M Hot DIP Galvanized Heavy Hex Bolts are commonly used in critical structural applications such as Bridges, buildings and other infrastructure. Ensuring their quality is critical to the safety and structural integrity of these works. The control and traceability of the A325M heavy duty hex bolt or any fastener is a key aspect of the construction and engineering industry. Safety and structural integrity are the correct applications that distinguish ASTM A325M Hot DIP Galvanized Heavy Hex Bolts. Batch control and traceability help maintain the highest safety standards. Batch control ensures that the bolts used in the project come from the same production batch. This helps maintain consistent quality and ensures that all bolts from a particular batch meet the same specifications and standards. In the rare cases where defects or problems are found in a particular batch of bolts, being able to trace back to the source of those bolts can facilitate an effective recall and replacement. This minimizes downtime and project delays.