China DIN6914 Manufacturer, Supplier, Factory

ASME B18.21.1 Spring Washer are widely used in load-bearing and non-load-bearing structures of general mechanical products. They are characterized by low cost and convenient installation, and are suitable for the parts with frequent assembly and disassembly. ASME B18.21.1 Spring Washer in the screw industry, often called ASME B18.21.1 Spring Washer. The benefit of spring lock washers lies in the trapezoidal shape of the washer. When compressed to loads near the proof strength of the bolt, it will twist and flatten. This reduces the spring rate of the bolted joint which allows it to maintain more force under the same vibration levels. This prevents loosening.

En14399-3 Grade10 Black Hex Nut with Hr is usually used with a bolt and a washer, En14399-3 has several types such as: En14399-3 En14399-4 En14399-5 En14399-6. En14399 is also DIN6914, Bolt and nut gaskets are used in combination. En14399-3 Grade10 Hex Nut with Hr is usually black. Bolts, nuts and gaskets have hr or hv.

Hot DIP Galvanizing En14399-3 Bolt Hr is usually used with a nut and a washer, Hot DIP Galvanizing En14399-3 Bolt Hr has several types such as: En14399-3 En14399-4 En14399-5 En14399-6. En14399 is also DIN6914, Bolt and nut gaskets are used in combination. Hot DIP Galvanizing En14399-3 Bolt Hr is usually black. Bolts, nuts and gaskets have hr or hv.

Steel Structure Wedge Anchor are designed to tie the concrete slab with the steel beams and steel deck. This weld studs shear connectors can resist shear forces and increase shear loading capacity in steel buildings. Steel Structure Wedge Anchor Mainly applied for through steel deck stud welding in composite construction project. All Shear Studs are supplied with ceramic ferrules (ceramic ring). The Ceramic ferrules are made of cordierite and able to withstand heat shock as well as high temperatures without melting or breaking

Shear Connector Welding Screw refer to the installation of steel pins or grommets, that extend out of the top flange of a steel support beam. Normally the Shear Connector Welding Screw are welded, with a spot welder, after the metal deck is installed over the supporting structural steel. The spot welder will burn through the metal deck and attach the Shear Connector Welding Screw directly to the top of the steel beam.

DIN931 Heavy Hexagonal Bolt Hex Bolt are designed to endure harsh conditions and bear heavy loads, providing you with a superior level of reliability that you can count on. Made from high-grade carbon steel, our hex bolts are designed to be tough and durable. The DIN931 Heavy Hexagonal Bolt Hex Bolt ensures that the bolts can handle high pressures and stresses, while the hexagonal head of the bolts provides excellent grip and allows for easy installation with a wrench or socket.